At least for the the East Brunswick, NJ, servers, I had the easiest time
with DHCP (not the static setup):
/etc/hosts:
127.0.0.1 localhost CCxxxxx-A # where CCxxxxx-A is your hostname
24.x.x.x CCxxxxx-A loghost # where 24.x.x.x is your assigned IP
/etc/nsswitch.conf:
hosts: files dns
/etc/resolv.conf
domain ebnsk1.nj.home.com
nameserver 24.3.196.33
nameserver 24.3.196.33
/etc/dhcp.elx0 (empty file)
/etc/hostname.elxl0 (empty file)
NOTE: replace "elxl0" with your NIC device name
$ netstat -rn
Routing Table:
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ------ ---------
24.x.x.0 24.x.x.x U 3 2 elxl0
224.0.0.0 24.x.x.x U 3 0 elxl0
default 24.x.x.1 UG 0 44
127.0.0.1 127.0.0.1 UH 0 236 lo0
$ ifconfig -a
lo0: flags=849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232
inet 127.0.0.1 netmask ff000000
elxl0: flags=4843<UP,BROADCAST,RUNNING,MULTICAST,DHCP> mtu 1500
inet 24.x.x.x netmask ffffff00 broadcast 24.x.x.255
[Thanks to Alan Lucero.]
[an error occurred while processing this directive]