HPUX: PDC version w/out rebooting.
The current revision of Firmware can be determined using on-line
diagnostics. If on-line diagnostics are not present on your
system, use the BOOT CONSOLE HANDLER procedure to verify the
current revision.
Refer to the appropriate on-line diagnostic procedure to determine
the revision of firmware presently installed on your system.
Procedure A: For HP-UX systems prior to 10.20 & all MPE/iX systems
==================================================================
1. At the system prompt, enter "sysdiag"
2. At the DUI prompt, enter "sysmap"
3. At the ENTER MAP prompt, enter "cpumap"
4. Note the PDC Firmware value
5. At the ENTER MAP prompt, enter "exit"
6. At the DUI prompt, enter "exit"
For HP-UX systems with 10.20 and later,it is necessary to determine
the Support Tools Manager Version to determine which procedure to
follow.
To determine the Support Tools Manager version:
===============================================
1. Login as root
2. At the prompt, enter 'mstm'
3. Note the Support Tools Manager Version
For Version A.07.00 or less, continue with Procedure B
For Version A.08.00 and later, continue with Procedure C
Procedure B: Support Tools Manager version A.07.00 or less
==========================================================
4. Press f2 (ok)
5. Press f4 (device)
6. Press f5 (select class)
7. Move cursor to "Processor"
8. Press the 'enter' key on the keyboard
9. Press f2 (ok)
10. Press f8 (previous menu)
11. Press f5 (tools)
12. Press f2 (information)
13. Press f2 (run)
14. Press f3 (info log)
After a few seconds, the Information Tool Log for
the CPU will be displayed. The 'PDC Firmware
Revision' is displayed in the first column.
15. Note the PDC Firmware value.
16. Press f2 (done)
17. Press f8 (previous menu)
18. Press f8 (previous menu)
19. Press f8 (exit)
20. Press f2 (ok)
Procedure C: For HP-UX systems with 10.20 and later AND Support
Tools Manager version is A.08.00 or later
===============================================================
4. Press f2 (ok)
5. Move the cursor to "CPU"
6. Press f3 (select)
7. Press f4 (menu bar on)
8. Enter "T" to select Tool Menu
9. Enter "I" to select Information Mode
10. Enter "R" to Run
After a few seconds, the Information Tool Log for
the CPU will be displayed. The 'PDC Firmware
Revision' is displayed in the first column.
11. Note the PDC Firmware value
12. Press f2 (done)
13. Press f8 (exit)
14. Press f2 (ok)
Recent comments